MoniMax 5600T
6. Appendix
B.4.1 Printing Position for One Sheet and Black Mark
2 (Character Pitch))
Paper Rolling Direction
12±0.5
60 (Max)
79.5±0.5
Fig. 6.3 Paper Length and Printing Position for a Transaction
Note 1) Vertical margin is 0.6 x 10 mm.
Note 2) Difference of the characters in the paper rolling direction is ±0.3mm.
B.4.2 Printing specification of the black mark
1) Use black without dark or bright shades.
2) Use the oil ink. (no surface gloss)
3) Permeation ratio: Less than 10%
4) Reflection ratio - PCS 0.9 or higher (Less than Mark GBase PCM II 900nm)
5) Thickness should take precedence over reflection ratio.
6) The slippery gap between the black mark and the rule mark should be less than
0.5mm.
6 - 9