HYOSUNG MoniMax 5600T Operator's Manual page 117

MoniMax 5600T
Error Code
To show that the card staying inside
ICRW was moved up to the point where
3001600 status request information change. To
show that card was inserted into the
ICRW through rear side by external force
To show that the card was not carried to
the specific
3001700
number of trial for specified time during
execution of RETRIEVE command.
To show
detection sensor(SW2) and card width
3001800
check sensor(SW1) are not operating
correctly.
To show that a card was not inserted
from the rear, even if 10 seconds had
3001900
passed after the execution of BACK
ENTRY command
3002000 To show that track has parity error
To show that read error has happened in
3002100
Multiple magnetic read command.
To show that write error is detected
3002200
through write/verify procedure.
To show that only SS,ES,LRC are
3002300
contained in the track. (no retry)
To show that the card has no magnetic
3002400
track(no retry)
To
3002500 error(Jitter,Preamble,Postamble)
happended in write verify.
3002600 To show that the track has no SS.
3002700 To show that the track has no ES
3002800 To show that the track has no LRC error
Cause
location after specified
that shutter open/close
show that quality
has
6 - 22
6. Appendix
Handling