Technical Specifications; Installation - Rosslare Multi-Smart AY-K35 Installation & User Manual

2. Technical Specifications

Electrical Characteristics
Power Supply Type
Operating Voltage Range
Current @ 12 V
Bluetooth BLE Read Range*
RFID and NFC Read Range**
LED/Buzzer Controls
Tamper Output / Touch Button
Output
Maximum Cable Distance to
Controller
Environmental Characteristics
Operating Environment
Operating Temp. Range
Operating Humidity Range
Vandal Resistance
Antimicrobial efficacy
Physical Characteristics
Dimensions (H x W x D)
Weight
* Read range is different for different smartphones and also is affected by a variety of factors.
** Read range listed is statistical mean rounded to nearest centimeter, measured in open air using Rosslare MIFARE Classic EV1 (ISO card). Form factor, technology and
environmental conditions, including metallic mounting surface, can degrade read range performance; plastic spacers are recommended to improve performance on
metallic mounting surfaces.

3. Installation

3.1. Mounting the Multi-Smart™ Readers
When selecting an area for mounting, ensure the location is flat.
To mount Multi-Smart™ Readers:
1. Drill 2 holes in the wall, using the mounting template provided in the installation.
www.rosslaresecurity.com
Regulated
8 to 16 VDC
Maximum: 300 mA @ 12 VDC
12 m (39.3 ft) (line of sight)
Contactless: 13.56 MHz: 5 cm (1.97 in.), 125 kHz: 8 cm (20.32 in.)
Dry Contact, N.O.
Open collector, active low, max. sink current 20 mA @12 VDC, 10 mA@5 VDC. Current
limit: 500 Ω series resistance
Wiegand: 150 m (500 ft) with 18-AWG cable
OSDP (RS-485): 1,200 m (4,000 ft) with 2x2 18 AWG twisted shielded cable
IP68, UV-resistant, epoxy-potted, suitable for indoor and outdoor use
-35°C to 66°C (-31°F to 150°F)
0% to 95% (non-condensing)
IK09
Inhibits bacteria proliferation by up to 99.8%
88 x 48 x 24 mm (3.46 x 1.89 x 0.94 in.)
121 g (4.27 oz)
2
Multi-Smart™ Readers Installation & User Guide