About The Product; Compatibility - Kemppi A5 MIG Rail System 2500 Operating Manual

1.2 About the product

A5 MIG Rail System 2500 is a complete set of welding
mechanization equipment designed especially for
horizontal and vertical joints and for all position welding.
It can be used in medium-heavy industries for MIG/MAG
welding of long plates and for plasma or oxy-fuel cutters.
The rail is made of extruded aluminum and can be easily
extended, shortened or stiffened. As the rail does not
contain any racks, the risk of service interruption due to
spatter from the weld is minimized. It is flexible and can
be bent down to a diameter of three meters.
Bending the rail to diameters smaller than that will
deform it permanently. Specially rolled rails are used for
smaller diameters.
The rail is attached to the workpiece with magnetic
brackets or vacuum brackets. For secure attachment each
vacuum holder consists of one ejector and two vacuum
suction cups

1.3 Compatibility

A5 MIG Rail System 2500 is compatible with the following
welding equipment:
• FastMig M and FastMig X: all wire feeders and
control panels
• FastMig Pulse 350/450 power sources
• Control panel PF 65
• FastMig KMS 300/400/500 power sources
• Control panels SF 52W and SF 54
• SuperSnake mechanization models
• Other power source brands with limitations
Some of the functions are available only if the wire
feeder has the right control panel. For example, changing
memory channels at the welding carriage is available only
if the wire feeder has a control panel with the channel
remote control feature.
© Kemppi Oy 2021
4
A5 MIG Rail System R01