Introduction; General; About Hiarc M Product Series - Kemppi HiArc M 400R Operating Manual

1.

intrOduCtiOn

1.1

general

Congratulations on choosing the HiArc series power source. Used correctly, Kemppi products
can significantly increase the productivity of your welding, and provide years of economical
service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specifications of the device can be found at the end of the
manual.
Please read the manual carefully before using the equipment for the first time. For your
own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Items in the manual that require particular attention in order to minimise damage and
NOTE!
personal harm are indicated with this symbol. Read these sections carefully and follow their
instructions.
disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2

about Hiarc m product series

Kemppi's HiArc M products are inverter MIG/MAG welding power sources to be used in
a 3-phase mains power supply. HiArc welding machines are designed for industrial and
professional use.
These MIG/MAG power sources can be used with various wire feeders. However, it is
recommended to use the Kemppi wire feeder unit, which has been designed especially for use
with your HiArc power source.
The HiArc power sources are equipped with gas type selection buttons. HiArc automatically
presets the welding dynamic characteristic according to your gas selection choice.
Enjoy welding with your Kemppi product!
© Kemppi Oy / 1308
EN
3