Table of Contents
Advertisement
2.5 Mounting the carriage on the rail
1
1.
Mount the carriage on the rail with drive wheels
facing the rail.
2.
Check that the drive wheels are levelled with the
rail.
3.
Tighten the pressure screw so that the drive
wheels grip tightly to the rail.
2.6 Selecting a welding gun
Kemppi mechanization guns offer various benefits
compared with manual welding guns. Carriage control
2
and powering signals are integrated in the gun cable,
so there is only one cable needed between the wire
feeder and the welding carriage. This also enables the
adjustment of carriage functions and welding parameters
at the remote control device.
Kemppi offers three welding gun models designed
especially for mechanized welding:
3
PMT MN32C (Multi Neck model)
Multiple neck designs. Slightly bent neck available for
mechanized welding. Extra-long gas nozzle and contact
tip are available, suitable especially for root welding in
narrow grooves.
MMT42C
Gas-cooled straight neck model
MT 51MWC
Water-cooled straight neck model for heavy applications
Please see the technical details of the welding guns
in their documentation.
© Kemppi Oy 2021
2.7 Installing the welding gun
Check that the gun trigger mode is set to 2T.
and carriage using the desired welding parameters for
your welding jobs.
7
A5 MIG Rail System
3
1
5
4
1.
Fasten the gun holder on the weaving unit.
2.
Fasten the gun on the holder.
3.
Connect the control cable.
4.
Use adjustment screws and weaving
displacement adjustment to fine-adjust the
position of the gun.
Create memory channels at the welding machine
2
R01
Advertisement
Table of Contents
