Kemppi A5 MIG Rail System 2500 Operating Manual page 10

Pattern
P1 CH on
Pattern <-> 0
0 1 2
Determine the pattern used in weaving. Use + and –
buttons to select any of the three patterns:
0. Travels constantly while weaving (triangular).
1. Travels when weaving, stands during delay.
2. Travels during delay, stands when weaving
(square).
Press MENU to continue.
Hold out
P1 CH on
Hold out 0.1s
Set outer dwell time (the time that the torch holds at the
outer side of the weaving motion):
1. Use + and – buttons to change the time.
2. Press MENU to continue.
10
© Kemppi Oy 2021
Hold in
P1
Hold in 0.1s
Set inner dwell time (the time that the torch holds
at the inner side of the weaving motion):
1. Use + and – buttons to change the time in
seconds.
2. Press MENU to continue.
A5 MIG Rail System
CH on
R01