About The Product; Compatibility - Kemppi A5 MIG 1500 Operating Manual

1.2 About the product

A5 MIG Orbital System 1500 is a complete set of welding
mechanization equipment designed especially for orbital
applications. The mechanical design of this orbital carriage
is very flexible, and it can be used for:
• horizontal joints
• vertical joints
• welding with or without weaving.
The carriage is divided into two drive units, each of which
can be independently adjusted for different guide ring
diameters. Each drive unit has its own motor of which one
pulls and the other pushes to ensure stable operation at
both raising and lowering movement.
The system includes two control panels; one on the
carriage front surface and the other on the remote control
unit. During welding, the system can be operated by using
the remote control unit that provides the operator with
the most used controls of the carriage. The weaving unit
is synchronized with the movement of the carriage for
various weaving patterns.

1.3 Compatibility

A5 MIG Orbital System 1500 is compatible with the
following welding equipment:
• FastMig M and FastMig X: all wire feeders and
control panels
• MXF 65 and MXF 67 wire feeders
• FastMig Pulse 350/450 power sources
• Control panel PF 65
• FastMig KMS 300/400/500 power sources
• Control panels SF 52W and SF 54
• SuperSnake mechanization models
• Other power source brands with limitations.
Some of the functions are available only if the wire
feeder has the right control panel. For example, changing
memory channels at the welding carriage is available only
if the wire feeder has a control panel with the channel
remote control feature.
© Kemppi Oy 2021
4
A5 MIG Orbital System R01