1.2
about Hiarc product series
Kemppi's HiArc M 400A/M 500A products are inverter MIG/MAG welding power sources to be
used in a 3-phase mains power supply. HiArc welding machines are designed for industrial
and professional use.
These MIG/MAG power sources can be used with various wire feeders. However, it is
recommended to use Kemppi's HiArc F wire feeder units, which have been designed especially
for use with your HiArc power source.
The HiArc power sources are equipped with Automatic adjustment features. This means that
you can use either manual mode or Automatic mode when adjusting the welding parameters.
In Automatic mode, the HiArc chooses automatically the suitable preset welding parameters
according to your wire and gas selections.
Enjoy welding with your Kemppi product!
EN
4
HiArc M 400A, M 500A