Starting Up The System - Wincor Nixdorf iPOS plus Advanced User Manual

Starting Up the System

Starting Up the System
After installing the iPOS plus Advanced, switch on the system by using the
Power button on the front panel.
The system first performs an automatic self-test to test its basic functions.
For example, you may see the following message (irrespective of processor
type) on the monitor:
WN „ID xx/xx Date"
xx/xx is the placeholder of the BIOS version number.
Following the completion of the BIOS boot up, the BIOS will attempt to
boot up an operating system from a bootable media. The BIOS default
boot order from highest priority is,
If no bootable media is present and a message will be prompted on the
display.
01900xxxxx
1. HDD/SSD
2. USB Key
3. USB HDD
4. USB ODD
5. LAN PXE ROM (Network)
iPOS plus Advanced – User Manual 62