Starting Up The System - Wincor Nixdorf BEETLE /iPOS plus User Manual

Starting Up the System

Install the BEETLE /iPOS plus and switch on the system with the Power but-
ton located on the left side of the lower right corner of the unit. The sys-
tem will start booting up displaying a BIOS boot up screen . The following
message is shown for a brief duration during which you may press <F2> to
enter setup.
WN STD xx/xx dd/mm/yyyy
Press <F2> to enter setup
"xx/xx" is the placeholder of the BIOS version number and "dd/mm/yyyy"
is the date of release.
Following the BIOS boot-up the operating system will boot up if a bootable
storage device is present. The default boot priorities is as shown below, to
change the order of boot priority please navigate to the Boot tab of the
BIOS setup menu.

USB Key

USB CD/DVD

USB Hard Disk

Hard Disk

Network
BEETLE /iPOS plus User Manual 63