Manufacturer´s Certification; Fcc-Class A Declaration - Wincor Nixdorf iPOS plus Advanced User Manual

Manufacturer´s Certification
Manufacturer´s Certification
Therefore, you will find the CE mark on the device or packaging.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense. Modi-
fications not authorized by the manufacturer may void users authority to
operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
CAN UCES-3 (A)/NMB-3(A)
01900xxxxx
The device complies with the requirements of the
EEC directive 2014/30/EU with regard to 'Electro-mag-
netic compatibility" and 2014/35/EU "Low
Voltage Directive"
In addition, the iPOS plus Advanced has received the UL
symbol and cUL symbol.
iPOS plus Advanced – User Manual
and RoHS directive 2011/65/EU.
1