Table of Contents
Advertisement
Starting up the system
The configuration label shows you the equipment included in your
modular BEETLE /L POS system. A sample is contained in the
Appendix. The label is located on the underside of the BEETLE /L.
The data specified there are required for entering the setup parameters
(see Setup).
Start and runup behaviour
After installing the BEETLE /L, switch on the POS system using the
power switch on the front panel.
The system first performs an automatic self-test to test its basic
functions.
For example, you may see the following message (irrespective of
processor type) on the four-line cashier display or on the monitor:
xx/xx is the place holder of the version number
The system then determines the medium from which the operating
system and POS application are to be booted. Each medium is
assigned a logical drive according to the configuration of your
BEETLE /L.
WN ID xx/xx Date
GB - 55
Advertisement
Table of Contents
