THORLABS RSB1 Operation Manual page 10

Raman Spectroscopy Bundle
Post Holder, a CF125C Clamping Fork, 3500 ml Quartz Cuvette, and a RPB
Polystyrene Calibration Block.
Front End for Measurements of Liquid Samples in a Cuvette with the
RSBC1/M
RSB1/M Base Unit (Metric Type). Included are TR40/M Mounting Post and
PH50E/M Post Holder, a CF125C/M Clamping Fork, 3500 ml Quartz
Cuvette, and a RPB Polystyrene Calibration Block.
RSBA1 Adapter for Mounting of a 60 mm Cage System to the Input Aperture of
either RSB1 or RSB1/M.
Required Accessories:
Laser Driver CLD1015
785 nm Laser We recommend the Thorlabs
see the recommended laser specifications
Replacement parts:
RPB Raman Spectroscopy Polystyrene Standard Block for Instrument Calibration
with the RSBC1(/M) Cuvette Measurement Front End.
RPC Raman Spectroscopy Polystyrene Standard Chip (Æ 25 mm) for Instrument
Calibration with the RSBR1(/M) Reflective Measurement Front End.
CV10Q35F 3500 ml Macro Fluorescence Cuvette with Cap
To purchase the above replacement parts, please contact Thorlabs.
Recommended Accessories:
Safety Glasses
ADAFC1 Mating Sleeve:
MR16L01 Armored Fiber Patch Cable: To connect the laser to the FC/PC port of the front
Page 3
is the Recommended Laser Driver
FPV785M
To connect the laser pigtail to the armored fiber patch
cable.
end.
Chapter 1: General Information
laser. If using a different laser, please
Technical Data
73
.
MTN022733-D02