SECTION 13 – ELECTRICAL COMPONENTS
ý
DANGER
• See General Warning, Section 10, Page 10-1.
ý
WARNING
• See General Warning, Section 10, Page 10-1.
KEY SWITCH
See General Warning, Section 10, Page 10-1.
Testing the Key Switch
See Test Procedure 8, Section 11, Page 11-23.
Key Switch Removal
1. Disconnect the batteries and discharge the controller. See Disconnecting The Batteries on page 10-3.
2. Remove the center dash panel (Figure 13-1, Page 13-1).
2.1. Remove the plastic cap (1) covering the mounting screw (2) on each side of the center dash panel
(3) (Figure 13-1, Page 13-1).
2.2. Loosen, but do not remove, the screw (2) on each side of the center dash panel (3).
2.3. Insert screwdriver at the top center of the dash between dash and cowl brace. Gently pry center
dash out slightly from under edge of cowl brace.
2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
3
Figure 13-1 Dash Removal
13
2
1
Page 13-1