Section 12 - Iq Display Module (Iqdm) Series 2 And Iqdm-P Diagnostics; Plugging The Handset Into The Vehicle - Club Car DS Villager 4 Maintenance And Service Manual Supplement

SECTION 12 – IQ DISPLAY MODULE (IQDM)
SERIES 2 AND IQDM-P DIAGNOSTICS
ý
DANGER
• See General Warning, Section 10, Page 10-1.
ý
WARNING
• See General Warning, Section 10, Page 10-1.
NOTE: For information specific to the IQDM-P programming features, See Section 18 – IQ DISPLAY
MODULE (IQDM-P) Programming.

PLUGGING THE HANDSET INTO THE VEHICLE

1. Connect one end of the cable to the jack located on the bottom of the handset.
2. Connect the cable adaptor to the IQDM cable.
3. Find the IQDM jack on the vehicle.
4. Remove the dust cap from the IQDM jack.
5. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack.
Note: Seat shown in illustration
may not match all models.
Figure 12-1 IQDM Jack Under Seat in Extended
Position (DS Villager 4)
2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
Figure 12-2 IQDM Jack Under Instrument Panel
(Turf 1/Carryall 1)
12
Page 12-1