Information; Programmer Setup; Program; Faults - Club Car DS Villager 4 Maintenance And Service Manual Supplement

12
IQ DISPLAY MODULE (IQDM) SERIES 2 AND IQDM-P DIAGNOSTICS
Resetting All Settings
1. During an active session when the settings need to be returned to the original values (the values that
were active at the beginning of the session), scroll to the functions menu and select.
2. Select settings.
3. Select reset all settings.
4. Press + on the change value button to confirm the operation.
5. The handset will display an "executing..." message for the next few seconds while the controller settings
are being stored in the handset's memory (Figure 12-4).
6. When the handset is finished resetting the speed controller settings, a confirmation message is dis-
played (Figure 12-7).

INFORMATION

The information menu is accessed by using the up or down arrow to scroll to information and pressing the
right arrow key to activate the menu.
This menu selection displays information pertaining to the speed controller. The information provided from
this menu selection includes:
Model Number
Displays the model number of the speed controller.
Serial Number
Displays the serial number of the speed controller.
MFG Date
Displays the date the speed controller was manufactured.
Software Version
Displays the speed controller software version.

PROGRAMMER SETUP

The programmer setup menu selection allows the user to set the LCD display contrast, records the fault his-
tory of the handset, and displays information pertaining to the handset.

PROGRAM

This menu allows the user to adjust the contrast on the display screen. After selecting the LCD–Contrast
menu, use the change value buttons to adjust the contrast for the best readability.

FAULTS

This menu selection displays faults that have been detected within the handset. This faults menu does not
pertain to any faults detected in the speed controller.
Page 12-14 2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
Information