Safety And Compliance; Definition Of Warnings And Cautions; Safety Symbols - Edwards E1M18 Instruction Manual

1. Safety and compliance

1.1 Definition of Warnings and Cautions

NOTICE:
This manual meets our obligation to provide you with information. For safe operation
from the start, read these instructions carefully before you install or commission the
equipment.
Read all the safety instructions in this section and the rest of this manual carefully
and make sure that you obey these instructions. The equipment must only be
operated and maintained by trained personnel in the proper condition and as
described in this instruction manual.
Obey local and state requirements and regulations. If you have any questions about
safety, operation or maintenance of the device, please contact our nearest subsidiary.
Important safety information is highlighted as warning and caution instructions. Obey
these instructions.
WARNING:
If you do not obey a warning, there is a risk of injury or death. Different symbols are
used according to the type of hazard.
CAUTION:
If you do not obey a caution, there is a risk of minor injury, damage to equipment,
related equipment or process.
NOTICE:
Information about properties or instructions for an action which, if ignored, will
cause damage to the pump or the system.
We reserve the right to change the design and the stated data. The illustrations are not
binding.
Keep the instructions for future use.

1.2 Safety symbols

The units used throughout this manual conform to the SI international system of units of
measurement.
The following warning labels may be present on the pump and used throughout the
product documentation:
A34310880_T - Safety and compliance
Page 7