Edwards E1M18 Instruction Manual page 3

Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
The following product
Pump type
XXX
343 = E1M18
363 = E2M18
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC Machinery directive
2014/34/EU ATEX directive on use in potentially explosive atmospheres.
Intertek Testing and Certification Limited, 0359
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
ATEX marking:
TCF 218
2011/65/EU Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009 Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 61010-1:2010 *
* 1-phase pumps only
EN ISO 80079-36:2016
EN ISO 80079-37:2016
CE Declaration of Conformity
AXXX - YY
Variant Motor description
YY ZZZ
01 to 99 903 = 220V/240V 50/60Hz Single Phase
904 = 100V/200V 50/60Hz Single Phase
930 = 220V/240V 50/60Hz Single Phase
940 = 200-230V/380-460V 50/60Hz Three Phase
981 = 115/230V 60Hz Single Phase
984 = 110/200-240V 50/60Hz Single Phase
II 3 G Ex h IIB T4 Gc
INTERNAL ATMOSPHERES ONLY
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
The pumps comply with EN 61010-1 when installed in accordance with the instruction
manual supplied with the pumps.
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources
''b'', liquid immersion ''k''
- ZZZ