Connecting The Control Medium; Assembly / Disassembly Of Spare Parts - GEM 410 Installation, Operating And Maintenance Instructions

Control function 1 and 2: connector 4 is
closed with a blanking plug.
Control
function
1 (NC)
2 (NO)
3 (DA)
+ = available / - = not available
(for connectors 2 / 4 see photo above)
11.3 Connecting the control
medium
Important:
Connect the control medium
lines tension-free and without any
bends or knots! Use appropriate
connectors according to the
application.
Thread size of the control medium
connectors: G1/4
Control function
1 Normally closed (NC)
2 Normally open (NO)
3 Double acting (DA)
For connectors 2 / 4 see photo above
Connector 4
Connector 2
Connectors
2 4
+ -
+ -
+ +
Connectors
2: Control medium (open)
2: Control medium (close)
2: Control medium (open)
4: Control medium (close)

Connecting the control medium

Remove blanking plug 1.
G
For control function 1 and 2 screw the
G
connector of the control medium 3 (G 1/4)
into control medium connector 2 of the
actuator.
For control function 3 additionally screw
G
second connector of the control medium
(G 1/4) into control medium connector 4
of the actuator.
12 Assembly / disassembly
of spare parts
27 / 36
4
3
410