Service Position For Cutting Unit; Assembling Cutting Unit - Husqvarna Rider 100 series Workshop Manual

Repair instructions

Service position for cutting unit

Follow the instructions for "Removing the cutting
unit" above. Lift off the unit and lean it against the
machine or a wall.
Attaching the cutting unit
1 Place the belt under the stay of the cutting unit.
2 Fit the cutting unit's pipe together with the unit
frame's pipe. Push the cutting unit in and make
sure the guide bolts fit into the grooves on the
unit frame, one on each side.
3 Grab the pipes and push the unit in.
4 Push the unit until you feel the pipes touch
bottom.
5 Fit the belt according to the picture.
6 Tighten the belt with the belt tensioner.
7 Fit the front cover.
8 Move the cutting unit height control from the S
position to any of the other positions.
English – 47