Errors, Faults And Remedy; Care And Maintenance; Care Tips; Cleaning Cartridge Valve - Viega 8611.2 Instructions For Use Manual

3.3

Errors, faults and remedy

Error
The urinal does not flush.
The flush is too weak.
The urinal flush runs through.
3.4

Care and maintenance

3.4.1

Care tips

3.4.2

Cleaning cartridge valve

Urinal flush plate for Prevista Visign for Style 21
Cause
The shut-off valve closed.
The cartridge valve dirty or dam‐
aged.
The shut-off valve is not open far
enough.
The cartridge valve dirty or dam‐
aged.
The cartridge valve dirty or dam‐
aged.
Use normal soap or a mild cleaning agent for regular care and preven‐
tion of lime scale on the flush plate. Under no circumstances should
scouring agent or scratching objects be used.
Strong stains can be removed using typical household cleaner. Rinse
the detergent thoroughly with clear water after the prescribed exposure
time. There should be no residue on the components.
Clean the cartridge valve if necessary. Proceed as follows:
▶ Remove the flush plate from the installation frame.
Remedy
Open the shut-off valve.
Clean the cartridge valve, if neces‐
sary replace it.
Ä Chapter 3.4.2 „Cleaning car‐
tridge valve" on page 14
Open the shut-off valve.
Clean the cartridge valve, if neces‐
sary replace it.
Ä Chapter 3.4.2 „Cleaning car‐
tridge valve" on page 14
Clean the cartridge valve, if neces‐
sary replace it.
Ä Chapter 3.4.2 „Cleaning car‐
tridge valve" on page 14
Handling
14