Table of Contents
Advertisement
3.4
Errors, faults and remedy
Error
The WC does not flush.
The WC flush runs through.
3.5
Care and maintenance
3.5.1
Care tips
WC flush plate for Prevista Visign for More 205 sensitive
Setting the flush volume of the Viega Hygiene+ function (C)
Flush volume (in litres)
3
7.5
Indication of the flush volume actuation
Sensor range
Flashes on the left side
Flashes on the right side
Cause
The supply voltage has failed.
The cistern is not yet completely
full.
There is no water in the cistern.
The corner valve is closed.
The control is defective.
The plugs of control and flush
plate have not been connected.
The seal at the filling valve is dirty
or damaged.
The seal at the drain valve is dirty
or damaged.
Use normal soap or a mild cleaning agent for regular care and preven‐
tion of lime scale on the flush plate. Under no circumstances should
scouring agent or scratching objects be used.
Strong stains can be removed using typical household cleaner. Rinse
the detergent thoroughly with clear water after the prescribed exposure
time. There should be no residue on the components.
Position of switch 8
0
1
Flush volume
Large flush volume actuated
Small flush volume actuated
Remedy
Check the power supply.
Wait until the cistern is sufficiently
full.
Open the corner valve.
Replace the control.
Establish the plug connection.
Ä Chapter 3.2.2 „Mounting the
flush plate" on page 13
Check the seal, replace if neces‐
sary.
Check the seal, replace if neces‐
sary.
Handling
24
Advertisement
Table of Contents
