Table of Contents
Advertisement
42
Additional settings
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Dial and fax tones volume
You can adjust the volume for the line tones you hear when dialling and
connecting to another fax machine.
1. Press
you hear the dial tone.
2. Press
to adjust the volume which is displayed on the screen.
Beeps on/off
Your BT PaperJet 30 gives beeps to alert you to faults, errors etc. You can
switch these beeps to High, Med, Low or Off.
1. Press
repeatedly until the display shows FAX SET-UP then press
2. Press
to display VARIOUS SETTINGS .
3. Press
repeatedly until the display shows BUZZER VOL:LOW .
4. Press
or
to switch between HIGH , MED , LOW and OFF .
5. Press
to confirm the option displayed.
6. Press
to return to standby.
Transmission speed
Your BT PaperJet 30 is set to send faxes at 9600bps (9.6). If you
consistently fail to send faxes to a particular number it may help to
reduce the transmission speed to 4800bps (4.8).
1. Press
repeatedly until the display shows FAX SET-UP then press
2. Press
to display VARIOUS SETTINGS .
3. Press
repeatedly until the display shows TX SPEED 9.6 .
4. Press
or
to switch between 4.8 and 9.6 .
5. Press
to confirm the option displayed.
6. Press
to return to standby.
.
.
Advertisement
Table of Contents
