Table of Contents
Advertisement
30
SMS
Writing tips
Press
to switch between upper and
lower case letters.
Press
or
to move the cursor to the
point you want or create a space.
Press
to delete a character to the left of
the cursor.
The top left of the display shows you the
number of characters remaining, starting at
160 and counting down to 0.
If you save a copy of your text message it
will be stored in the SMS SENT folder so you
can send it to another recipient or change it.
If you press
after writing a text or no
button is pressed for 2 minutes, your text is
automatically saved in the SMS WRITTEN
folder.
SENT SMS memory full
When the memory is full, the display shows
MEMORY FULL DELETE SENT SMS. You will
not be able to write any more texts. Delete
one or more messages from the memory,
page 32.
Power failure
If your BT PaperJet 30 is without power for
over one hour, all saved/stored text
messages will be lost. This will be listed in
the power failure report printed when the
power is restored.
WRITTEN SMS memory full
When the memory is full, the display shows
MEMORY FULL DELETE WRITTEN SMS.
You will not be able to write any more texts.
Delete one or more messages from the
memory, page 32.
If MEM ALMOST FULL DELETE REC. SMS
is displayed you have reached 28 messages
out of 30 max. It is advisable to read and
delete messages. See Delete texts page 33.
If MEM FULL. DELETE REC. SMS appears
the memory is full and you will not be able
to receive any more text messages until
you have deleted texts from the memory.
See Delete texts page 33.
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
7. During sending, your BT PaperJet 30 displays TRANSMITTING , then
TX COMPLETED if successful or TX ERROR if unsuccessful.
8. After sending, the display gives you the option to save the text - SAVE
SMS: Press
Save texts
You can write a text and save it to send later.
1. Press
then
2. Press
and use the keypad to write your text message.
3. When you have finished, press
be saved in the SMS WRITTEN folder.
Receiving texts
Your BT PaperJet 30 can store up to 30 texts in the reception memory.
When you receive a text message, the
shows SMS RECEPTION . The
set your BT PaperJet 30 to give an audible alert, see page 32.
Reading texts
When the
icon appears on the display and the message LED is
flashing, you have received one or more text messages.
1. Press
to display SMS RECEIVED . The number of texts is also displayed
(max. 30).
2. Press
to display DISPLAY LIST .
3. Press
. The display starts with the newest text first and shows the
reference number and the sender's number.
or
to switch between YES or NO . Press
or
to scroll to WRITE SMS .
. Display shows SAVED . Your text will
indicator light also flashes. You can also
to confirm.
icon on the display flashes and
Advertisement
Table of Contents
