British telecommunications (bt) user guide telephone bt paperjet 30 (64 pages)
Summary of Contents for BT Accord 30
Page 1
• Phone cord to connect your BT Accord 30 to your telephone • PC connection cable to connect your BT Accord 30 to your computer • Screwdriver pin to adjust your microphone sensitivity Replacement parts and accessories are available from your usual supplier or...
Page 2 Before you start The BT Accord 30 is simple to set-up and operate but please take the time to read this instruction manual to ensure you get the best from your equipment. Your BT Accord 30 amplifier can be connected to your telephone and/or your computer.
Page 3
(this cord has an RJ-11 modular plug on either end). Plug To connect the BT Accord 30 to your computer you will need to use the long one end of the cord to your telephone from where you unplugged your handset (A) cable supplied with two jack plugs at each end.
Page 4
Page 6 The power on/off switch (5) The controls The BT Accord 30 will switch to standby mode automatically after a period of Telephone/computer selection switch inactivity. Turning off the unit does not affect normal telephone communication through The telephone/computer application switch (8) is for you to select either the handset, so you can answer or make phone calls through the handset as usual.
Page 8 Microphone sensitivity control Operation The BT Accord 30 allows you to adjust the outgoing sound volume, and the high Making calls using the headset and low frequencies associated with it. To fine tune the transmission volume, place •...
• Check that the headset/handset and the cable Standard operating voltage 3V DC connecting the BT Accord 30 to the telephone are properly connected Operating Current (Max) 9 mA • Check if the telephone/computer switch (8) is set...