Error Correction Mode (ECM)
ECM is a standard system for correcting errors caused by interference on
the line. It works when your machine and the sending or receiving machine
both have ECM switched on. When this is the case E is displayed during
transmission.
The default setting for ECM on your BT PaperJet 30 is On. You can
switch the setting On or Off.
1. Press
repeatedly until the display shows FAX SET-UP then press
2. Press
to display VARIOUS SETTINGS .
3. Press
repeatedly until the display shows ECM:ON .
4. Press
or
to switch between ON and OFF .
5. Press
to confirm the option displayed.
6. Press
to return to standby.
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Additional settings
.
43