Table of Contents
Advertisement
40
Additional settings
If connected to a switchboard, see page 61.
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Voice call alert
If your BT PaperJet 30 is set to PHONE/FAX reception, it will
automatically alert you to voice calls with a 20 second tone. You can
change the duration of the tone, from 15 to 40 seconds.
1. Press
repeatedly until the display shows INSTALLATION .
2. Press
repeatedly until the display shows FAX/TEL TIMER:20 .
3. Press
or
to scroll through the options: 15 , 20 , 30 or 40 .
4. Press
to confirm the option displayed.
5. Press
to return to standby.
Remote start code
If you answer a call on an extension phone, before BT PaperJet 30 has
automatically answered, and then find it is a fax call, you can transfer the
call to the BT PaperJet 30 by pressing
You can change the 5 to another number 0-9 or , if required. You can
also switch remote start off.
1. Press
repeatedly until the display shows INSTALLATION then
press
to display TEL. LINE SET-UP .
2. Press
again. The display shows PUBL.LINE(PSTN ).
3. Press
repeatedly until the display shows REMOTE START:ON .
4. To switch the code off, press
confirm.
Or
To change the code press
current code.
5. Enter the new code
on the keypad of your phone.
or
to scroll to OFF and press
. The display shows TYPE CODE above the
-
or
.
to
Advertisement
Table of Contents
