Using Your Paperjet 200; Set The Fax Operation Mode - BT PAPERJET 200 User Manual

Using your PaperJet 200

Set the fax operation mode

You can set your PaperJet 200 to work manually,
automatically or with an answer machine.
To set the mode
Use the
MODE
PaperJet 200 to work the way you want.
Press the
MODE
shows the setting you want.
FAX
Your machine automatically answers
incoming calls as faxes. This mode is
used if you want your PaperJet 200 to
receive all calls as fax messages.
AUTO
Use this setting if you want your
machine to answer fax and voice calls
automatically. Your machine answers
all calls after one ring and checks for fax
tones. If none are detected, it is a phone
call. Your caller is put on hold, the
display shows LIFT HANDSET and the
machine rings again (please note that
only the PaperJet 200 machine will
ring, other phones on the same line
will not ring in AUTO mode).
button to set your
button until the display
If you do not lift the handset before the
ringing stops, your PaperJet 200 will
attempt to answer the call as an
incoming fax.
TAD
Use this setting if you wish to use the
answering machine.
Your answering machine answers all calls.
If the PaperJet 200 detects fax tones, it
will stop the answering machine and
receive the fax call automatically.
TEL
Use this setting if you want your
PaperJet 200 to act as a telephone –
faxes are not received automatically.
You must answer each call by lifting
the handset.
If you hear fax tones, (a beep every
3 seconds) press the START button and
replace the handset to begin receiving
the fax.
11