Receiving A Fax - BT DECTfax Plus Fax Machine and digital telephone system User Manual

Press the and buttons to scroll through
10
the options and press
option you require.
If you want to cancel a delayed send simply remove
the document from the feeder. Or if the document is
to be sent from the memory see ' To cancel a timed
job ' on page 25.
To send the faxes immediately simply press
after entering the last number.
Call back
Call back allows you to interrupt a fax to speak
to the person at the other end.
To use call back
While the document is being sent or
1
received is complete, press
The display will alternate between
TRANSMISSION
, if a document is being sent, or
RECEPTION
, if a document is being received
PHONE
and .
When the page that is being sent has gone
2
through, the other person's telephone will
ring and if they pick up, your handset will
then ring.
Answer the handset as normal and speak.
3
to select the
OK/Menu
Start
Hands Free.

Receiving a fax

You can set your DECTfax Plus to print faxes as
they are received or incoming faxes can be
stored in the memory, up to 20 Slerexe* pages,
and printed out at a later date. The default
setting is for memory receive to be switched on.
To switch off memory receive
When memory receive is off, you must ensure
paper is in the sheet feeder.
Press then
1 OK/Menu
shows 36 RX IN MEM.
3 6
Press . The display shows two
2 OK/Menu
options:
Y E S
Incoming faxes are stored in the
memory, even if there is paper in
the sheet feeder. This is the
default setting.
N O
Incoming faxes are printed as
they are received. If there is no
paper in the sheet feeder, the
faxes are stored in the memory.
buttons to select NO.
Use the and
3
OK/Menu to confirm the change.
* Slerexe is the name for the standard fax page.
Using your fax machine
then . The display
3 6
Press
19