Using your handset
Keypad tones
The handset is preset to have no keypad tones.
You can set it to loud or soft tones.
Press
then
1
OK
5
Use the
button to increase the volume.
2
The display will show 2 dashes or one or two
blocks.
Use the
button to decrease the volume or
3
switch the tones off.
Press
to confirm your choice.
4
OK
32
.
5
Call timer
After you have finished a call you can check
the length of the call.
To check the duration of a call
When you have finished a call, press the
1
button. The display shows the length of the
call in hours, minutes and seconds. The
display will return to normal after a few
seconds.
To clear the call duration, press the
2
button again while the call duration is being
shown. The display will return to 00 00 00.
Clr
Clr