Table of Contents
Advertisement
Date and time
It is important that your DECTfax Plus is
always set to the correct date and time.
This information is shown on the fax received
by the addressee and is required for faxes
programmed to be sent at a later date.
Setting the date and time
Press
then
1
OK/Menu
.
OK/Menu
2
1
The display shows the date and time
currently programmed.
Use the keypad to enter the date. For
2
example, for 7th May 1998, 9.15, press
.
98 09 15
Use the
and
buttons to move left and right
through the display.
Press
to confirm the entry.
3
OK/Menu
Your DECTfax Plus can now be used to send
and receive faxes.
NOTE
Once the date and time have been set, if you want to
make a change press
OK/Menu
to access the date and time setting
OK/Menu
function.
then
then
2
1
07 05
then
then
then
2
1
Entering your own telephone/fax number
Your telephone/fax number can be printed at
the top of each fax you send and displayed by
the machine you are calling.
To enter your own telephone/fax number
Press
then
1
OK/Menu
shows 22 NUMBER. Press
2
2
Use the keypad to enter your own number,
2
up to a maximum of 20 digits.
To enter a space, use the
a +, use the + button on the alphabetic keypad.
Press
to confirm the entry.
3
OK/Menu
Entering your name
You can add your name (such as the name of
your company) to be printed at the top of each
fax you send.
To enter your name
Press
then
1
OK/Menu
shows 23 NAME. Press
2
3
Enter your name using the alphabetic
2
keypad to type in the letters. You can enter a
maximum of 20 characters.
then
. The display
2
2
.
OK/Menu
button; to enter
then
. The display
2
3
.
OK/Menu
Setting up
13
Advertisement
Table of Contents
