Receiving A Fax - BT DECTfax Fax machine and digital telephone system User Manual

When the page that is being sent has gone
2
through, the other person's telephone will
ring and if they pick up, your handset will
then ring.
Answer the handset as normal and speak.
3
If the person you are sending the fax to wants to
speak to you while the document is being faxed to
them, your handset will ring - answer as normal.

Receiving a fax

You can set your DECTfax to print faxes as they
are received or incoming faxes can be stored in
the memory, up to 20 Slerexe* pages, and
printed out at a later date. The default setting is
for memory receive to be switched on.
To switch off memory receive
When memory receive is off, you must ensure
paper is in the sheet feeder.
Press then
1 Function
shows 36 RX IN MEM.
3
6
Press . The display shows two
2 Function
options:
Y E S
Incoming faxes are stored in the
memory, even if there is paper in
the sheet feeder. This is the
default setting.
* Slerexe is the name for the standard fax page.
then . The display
3 6
N O
Incoming faxes are printed as
they are received. If there is no
paper in the sheet feeder, the
faxes are stored in the memory.
buttons to select NO.
Use the and
3
Function to confirm the change.
If you answer a call on a telephone that is on the
same line as the DECTfax, and the call is a fax, you
activate the DECTfax by pressing # then 7 on the
telephone keypad then hanging up the telephone
when you hear the tones from the DECTfax.
To print out received faxes
When you have faxes stored in the memory
the button light will flash. You can print in
Fax
normal mode or economy mode.
Normal
Make sure you have paper in the sheet
•
feeder. Press the
Fax
faxes will print out.
Economy
This allows you to print out messages reduced
by 50% vertically so that two pages fit onto one
A4 printout.
Using your fax machine
Press
button. The stored
19