Setting The Receive Mode - BT DECTfax Plus Fax Machine and digital telephone system User Manual

Press the and buttons to scroll through
2
the options. You can also select WITHOUT
RING to have no ringer tone at all.
Use the + and buttons to select the volume.
3 -
There are 4 levels.
Press
4 OK/Menu to confirm
choices.When WITHOUT RING is selected the
icon will flash constantly in the display.
TEL

Setting the receive mode

You can set your DECTfax Plus to answer calls
automatically or manually. There are two auto
answer modes, to allow you to receive just
telephone calls and faxes or telephone calls,
faxes and voice messages.
To set the receive mode
Press the
• Tel Fax Tad
between manual; phone and fax; and phone,
fax and answering machine.
your
button to switch
Tel mode
When set to mode, the display shows:
Tel
All calls must be answered manually. If the call
is a fax (you will hear beeps from the other fax
machine), wait a few seconds and the
basestation will automatically switch to fax
receive mode. If it does not, press # then
your handset to activate fax receive mode.
Tel/Fax mode
When set to mode, the display shows:
Tel/Fax
Your DECTfax Plus will automatically
determine whether an incoming call is a phone
call or a fax call.
Tel/Fax/Tad mode
When set to
Tel/Fax/Tad
If a call is unanswered, the call will be taken
first by the answering machine. If the call is a
fax it will be received automatically.
Your DECTfax Plus machine is now fully set
up for use. To make any changes to your
settings, simply repeat the procedures.
on
7
mode, the display shows:
Setting up
15