Table of Contents
Advertisement
Setting user preferences
You can change a number of original settings to suit your preferences. These are:
Name
Original
Activity Report
Error Report
TX Confirmation
Report
RX Confirmation
Report
Line Monitor
Memory Entry
Report
Broadcast Report
RX Time/Date
Remote ID Type
Alternatives
setting
ON
ON/OFF Activity reports are printed automatically after
every 40 transactions.
ON
ON/OFF Error reports are printed automatically after any
failure in sending or reception.
OFF
ON/OFF Enables a report confirming the status of each
document sent.
OFF
ON/OFF Enables a report confirming the status of each
document received.
OFF
ON/OFF. Turns the speaker on or off. When ON, you can
hear the fax tones generated during a transmission.
OFF
ON/OFF Prints a memory report after scanning each
document into the memory.
ON
ON/OFF Prints the result of a Broadcast. Only shows whether
the entire transmission was successful (OK) or not (NG).
OFF
ON/OFF Prints the time and date, sender ID, your telephone
number, and the number of the machine from which a
document was sent.
CSI
ON/OFF Allows you to select the information printed under
Remote ID in the Activity Report.
Either:
the name assigned to a One-Touch button,
1)
dialled,
3)
number or name, or
CSI (if blank then the ID will show the dialled
blank.
4)
Additional features
the number
2)
38
Advertisement
Table of Contents
