BT BF900 User Manual page 37

Activity report guide
Your guide to the details shown on an activity report.
TYPE DEPT SESS
(a) (b) (c)
a) TYPE
Document sent from memory.
MEMORY TX
Document sent without scanning
DIRECT TX
into memory.
Document sent from number
MANUAL TX
entered via the keypad.
Document sent via a Group Dial
GROUP TX
button.
Document polled from your
POLLING TX
BF900's Bulletin Board.
Document polled by your
POLLING RX
BF900 from another machine.
Document sent to another
RELAY RPT
machine for further transmission.
Automatic reception mode.
AUTO RX
Manual reception mode.
MANUAL RX
Document broadcast from memory.
B'CAT TX
Relay initiate transmission.
RELAY INIT
Relay broadcast transmission.
RELAY BC
Relay document received into the
RELAY RX
memory.
Fax sent from a connected PC.
PCFAX TX
DATE/TIME DURATION
(d) (e)
Meaning
REMOTE ID SPEED
(f) (g)
b) DEPT. (Department number)
This is a two digit number which individual
users (or groups of users) can have to
identify them as the sender. Your BF900
lets you set up to 10 different department
numbers. See page 33.
c) SESS (Session number)
A three digit reference number which is
assigned automatically to each document.
d) DATE/TIME
Time at which each document began to be
sent or received.
e) DURATION
Length of time it took to send or receive
each document.
f) REMOTE ID
Identity of the machine your BF900 was
connected to for sending or reception of
documents. Your report shows one of four
types of ID:
Name (if it corresponds with a name stored
1
under a One-Touch or Speed Dial number.
The Tel number of the other machine.
2
Remote CSI.
3
Blank – selected for security reasons.
4
Additional features
PAGE RESULT
(h) (I)
36