Using the BF900
Using the BF900
Sending faxes
To load documents for faxing.
Load up to 30 pages at a time, face down, into
the document feeder. The first page is
automatically drawn a little way into the feeder.
Display shows
Do not try to send or copy documents which are:
•
still wet with ink or correcting f luid
•
very thick or very thin (for best results, paper should
be 80gsm)
•
stapled or clipped together
•
torn, folded, crumpled or with punched holes
•
on carbon paper or glossy paper.
When adjusting the settings, if you do not touch
any buttons for more than 1 minute, your BF900
will automatically return to standby.
In the display, RX=receive, TX=send.
15
.
SELECT LOC/COPY
Normal dialling.
(You can dial up to 30 digits including P if you
need to include a pause)
START
• Load the document.
• Set the
,
TYPE ORG
RESOLUTION
settings if necessary. (See page 27.)
• Dial the fax number you want on the BF900
keypad.
• Press the
button. The document is
START
scanned. Display shows
. You can now retrieve your
SCANNING MXX
original document.
• The fax number is dialled. Display shows
. When the call is answered, the
CALLING
display shows
FAX CONNECTION.
.
TRANSMITTING
• While the fax is being transmitted, the
display alternates between the number of
pages being sent and the fax number you
have dialled.
• After the last page has been completed, if the
call is successful display shows
and
PHOTO
MEMORY TX.
.
TX=OK