BT BF900 User Manual page 18

Using the BF900
Speed dialling
You can store up to 100 numbers in the speed
dial directory. (See page 23 on how to store
speed dial numbers.)
SPEED-DIAL FUNCTION
• Load the document.
• Set the
TYPE ORG
settings if necessary.
• Press the
SPEED DIAL
• Enter the 3-digit code (
number you want to dial.
• Press the
ENTER
scanned and the number is dialled
automatically.
Group dialling
You can have eight of the one-touch buttons as
group dial buttons. These are buttons 25-32.
Each of these buttons can hold up to 40 fax
numbers, enabling you to send a fax to all of
them just by pressing a single button. (See page
24 on how to store group dialling numbers.)
A
• Load the document.
• Set the
TYPE ORG
settings if necessary.
• Press the
ONE-TOUCH
which has been assigned as a group dial
button.
• The document is scanned and all the numbers
in the group are dialled automatically in turn.
17
, and
RESOLUTION PHOTO
button.
) for the
001-100
button. The document is
, and
RESOLUTION PHOTO
button you want
To set up a batch dial
You can set the ONE-TOUCH buttons to send
faxes automatically at a pre-set time every day.
This can be useful if you want to send faxes at
times when call charges are lower or if you are
faxing abroad to coincide with the other person's
office hours.
The one-touch buttons you select must have
phone numbers stored already.
7
FUNCTION ENTER
• Press the
FUNCTION
• Press (or the
7
PROGRAM TEL.NO. 0~9,#,*,>, ENTER
• Press the button.
ENTER
• Press (or the
4
BATCH TX 1~5,>, ENTER
• Press the button.
ENTER
• Press the
ONE-TOUCH
to use as a batch dial.
• Press the button. Display shows
ENTER
START TIME=00:00, PRESS ENTER
• Use the keypad to set the time you want to
start faxing.
• Press the button to confirm. Display
ENTER
shows
START TIME=XX:XX, DATA ENTRY OK
and then
BATCH TX. PRESS OT KEY
You can now enter another one-touch button to
set another batch dial, or press
to standby.
4 A
STOP
button.
buttons) to display
.
buttons) to display
.
button that you want
.
.
to return
STOP