At A Glance - BT BF900 User Manual

At a glance

At a glance
Display
One Touch buttons. Lets you dial up to 64
stored numbers at the touch of a single
buttons. No's 25-32 can alternatively be used as
Group Dial buttons, each button holding up to
40 phone numbers per group.
Function. Lets you select from the
Options and Programming menus.
Pause/Redial. Redials the last
number. Inserts a pause into a
number stored in the directory.
Speed Dial. Used for dialling
numbers stored in the directory.
1
Resolution. Lets you adjust the
resolution for documents you are
scanning, printing and copying.
Mode. Lets you set the
machine to receive telephone
or fax calls.
Hook. Lets you dial numbers from either the
BF900's keypad or an attached telephone.
Allows dialling to be heard through loudspeaker.
Recall. Used when
connected to a switchboard.
Control panels
Journal. Displays confirmation report details
of documents which have been sent, including
the session number, telephone number or ID
and whether the transaction was successful or
not. (Press COPY for a print out of each
individual report.)
Keypad
Clear/Tone
Clears information from the LCD display.
Allows switching from pulse to tone
dialling.
Tel/Dir. Lest you access and dial
numbers in the directory.
2
Photo. Sets the ideal resolution if you are
faxing photographs or shaded drawings.
Type Org. Lets you adjust the contrast
for documents you are sending.
Schedule. Displays details of documents yet
to be sent and which are stored in the memory.
FF Prints PC documents held in memory.
On-Line Indicates that a PC printer is on-line.
On-Line indicator
Green memory light. Comes on when
documents are stored in the memory.
Red alarm light. Comes on if there is a
problem such as a paper jam. Goes off when
you press the STOP button.
Copy. Press to start copying
a document loaded in the
Document Feeder Tray.
Stop. Stops any operation
currently in progress and
returns the machine to standby.
Start. Press to start scanning, faxing
or copying a document loaded in the
Document Feeder Tray.
Enter. Press to select the
menu option you want.