BT BF900 User Manual page 24

Using the BF900
To add mailbox number:
1
ENTER
• If you want to add a mailbox number, press
Display shows
• Use the keypad to enter the mailbox number.
• Press the
ENTER
ONE-TOUCH DIAL, PRESS OT KEY
If you want to add another one-touch number,
press the
ONE-TOUCH
repeat the steps above.
If you do not want to store another one-touch
entry, press the
Network addresses and mailboxes
In addition to fax numbers and names, you can
also store a network address number and a mailbox
number.
A network address lets you send a document direct
to a specific user on a PC network via their
receiving fax machine or modem. Not all fax
machines or modems you send to have this facility.
A mailbox number lets you send a fax into a
specific mailbox at the receiving machine and faxes
sent to this mailbox can normally only be accessed
by someone who knows the sub-address. Not all fax
machines that you send to have this facility.
Net address and mailboxes can only be used with
machines which comply with the international fax
standards.
For how to send faxes to a mailbox or Net address,
please see page 29.
23
STOP
MAILBOX NO=PRESS ENTER
button. Display shows
.
button you want and
button.
STOP
To store a Speed Dial number
You can store up to 100 fax numbers which can
be dialled by pressing just 3 buttons.
. 7
1
FUNCTION
.
STOP
• Press the
FUNCTION
FUNCTION MODE 0~9,#,*,<,>
• Press (or the
7
PROGRAM TEL. NO 0~9,#,*,>, ENTER
• Press the
ENTER
PROGRAM TEL NO. 1-5, <,>
• Press (or the
2
SPEED DIAL 1-5 ENTER
• Press the
ENTER
SPEED DIAL=
• Use the keypad to enter the 3 digit code
to set the speed dial location you
001-100
want.
• Press the
ENTER
#001=PRESS ENTER
• Use the keypad to enter the fax number you
want for the Speed Dial location shown.
Display shows
• Press the
ENTER
followed by
ENTRY OK
If you do not want to enter any more information,
press the STOP button to return to standby. The
new number will be saved.
• If you press
0
You can now enter another number or press
to return to standby.
STOP
2
0
ENTER
button. Display shows
.
buttons) to display
button. Display shows
.
arrows) to display
.
button. Display shows
_ _ .
PRESS ENTER
button. Display shows
.
.
#001=XXXX
button. Display shows
NAME 0=(NO) 1=(YES)
the display shows
SPEED DIAL
.
DATA
.
.