Remote Start - Directed Electronics 544T Owner's Manual

remote start

This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehicle
with the climate control system. If interior heating or cooling is
desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the vehicle.
important! (1) Never remote start your vehicle when the
keys are in the ignition, except when performing Valet
Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.
To remote start the vehicle:
1. Simultaneously press
one second.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. A remote start page notification with a unique melody (or
vibration) will be generated and the LCD will display the
remote start (19) icon as long as the vehicle is running.
note: The transceiver will generate a Page Notification
with a different unique two-tone beep (or vibrate) and
the remote start (19) icon will turn off when the remote
start shuts down.
4. In gasoline vehicles, the engine will start four seconds after
the parking lights flash. In diesel vehicles, the engine will
start when the WAIT-TO-START indicator on the vehicle's
dash goes out.
© 2002 directed electronics, inc.
®
and on the transceiver for
29