Silent Mode - Directed Electronics 544T Owner's Manual

To disarm the security system,
turn the ignition to the ON posi-
tion. Press the Valet button the
preset number of times (one to five
times) within five seconds. The
factory preset is one. After five
seconds, the system will disarm. If
the system does not disarm, you
may have waited too long; turn the
ignition off and on and try again.
Location of Valet Button_________________________________
Number of Presses_____________________________________
important! The Valet
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.

silent mode

To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. When Silent Mode has been
used the silent arm/disarm mode icon will indicate silent
arm/disarm. If you want the arm/disarm chirps turned off perma-
nently, your dealer can do this for you.
26
DRW-35
switch can be programmed to
®
for less than one second before
© 2002 directed electronics, inc.