Standard Button Configurations - Directed Electronics 544T Owner's Manual

t t r r a a n n s s c c e e i i v v e e r r f f u u n n c c t t i i o o n n s s
The transceiver buttons are used to send commands to the
system. The descriptions below reflect the standard configuration
for this system. The buttons can be custom configured for the
user's specific needs by the installer.

standard button configurations

Button
The System Arm/Lock and Multi-Level Security Arming func-
tions are controlled by pressing this button for one second.
Button
The System Disarm/Unlock and High Security Disarm functions
are controlled by pressing this button for one second.
Button
Channel 2 output is controlled by pressing this button for three
seconds. Hold the button down continuously while accessing
Channel 2 output.
Button
The panic feature is controlled by pressing this button for two
seconds. Press again to disable panic mode.
Button
The LCD backlighting will turn on when pressed for less than one
second; when held for more than five seconds the transceiver will
enter adjustment mode allowing the setting of the clock, timer
mode, and audible melody selection. For more information, please
refer to the Function Button Configurations section of this guide.
© 2002 directed electronics, inc.
9