Panic Mode; Valet Mode - Directed Electronics 544T Owner's Manual

note: The Warn Away
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering. Only the Warn Away
All arm/disarm page notifications will still be generated by the
transceiver in Silent Mode.

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transceiver. Just
press for two seconds, and you will enter panic mode. The
siren will sound and the parking lights will flash. To stop Panic
Mode press on the transceiver again.
note: Once panic mode has been entered, the siren will
sound for 30 seconds.
The transceiver will beep (or vibrate) continuously when the
system enters panic mode. The transceiver will not generate a
page notification when panic mode is exited.

valet mode

You can prevent your security system from passive arming by
using Valet mode. This is very useful when washing the vehicle
or having it serviced. In Valet mode, the security system will not
arm, even with the transceiver, but all convenience functions
(door locks, trunk release, remote starting, etc.) will continue to
work normally.
© 2002 directed electronics, inc.
response to lighter impacts is
®
® response is bypassed.
27