System Status Chirps; Table Of Zones - Directed Electronics 544T Owner's Manual

triggered so many times that the Nuisance Protection Circuitry
has bypassed that zone. In either case, the status LED and trans-
ceiver LCD will indicate which zone was triggered (see Table of
Zones section). The security system will retain this information
in its memory and chirp four or five times each time it is dis-
armed, until the next time that the ignition is turned on.

system status chirps

The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system's status as
described below.
Action Number of Chirps/
Remote Beeps
Arm 1
Arm 1 (3-second delay), 1
Disarm 2
Disarm 4
Disarm 5

table of zones

A zone is represented by the LED flashes used by the system to
identify a particular type of input. Standard input assignments are
listed in the following table.
© 2002 directed electronics, inc.
™
Description
System armed
System armed with
Bypass Notification
System disarmed
System disarmed with
Tamper Alert
System disarmed NPC
active
37