System Signal Paging Features - Directed Electronics 544T Owner's Manual

r r e e m m o o t t e e o o p p e e r r a a t t i i o o n n
The 554 remote start system operates at 434 MHz and incorpo-
rates Directed's proprietary A.S.K. out-board two-way transceiver.
The high frequency combined with Binary Data communication
achieves superior range with two-way communication.

system signal paging features

A page is the signal the control module sends to the transceiver as
confirmation of receipt of a command or alarm system status.
When the transceiver receives a page it will generate a page notifi-
cation to the user (notifications are audible beeps or transceiver
vibration) and the LCD icons will display the current system status.
Command Page
When a command (arm/disarm, remote start, or auxiliary
channel) from the transceiver is sent and received, the system will
send a command page back to confirm receipt.
Page Recognition Mode
The transceiver will leave a zone icon illuminated when it has
received a triggered response and will wait for violation recogni-
tion. Press any button on the transceiver, the LCD information
and alarm page alerts will be cleared.
note: The transceiver buttons will not send a command
to the system until the alarm page is cleared.
© 2002 directed electronics, inc.
17