Arming/Disarming While Driving - Directed Electronics 544T Owner's Manual

When a Triggered Response is activated the transceiver will:
Repeat four quick beeps (or vibrate) for 15 seconds.
The full trigger alert icon (28) will turn on for 15 seconds
The zone icons will turn on and remain on until a transceiver
button is pressed, clearing the page alert.
The transceiver will enter page recognition mode and
generate alarm page alerts.
note: Icons 13, 14, 15, and 16 represent alarm system
triggered sequence zone inputs. For more information
about icons and the zones they represent refer to the
Standard Remote Configurations section.

arming/disarming while driving

The alarm system can operate while the vehicle is being driven for
added safety when driving through areas of questionable security.
The alarm will only respond to the door trigger inputs and the
Fail-Safe starter kill will be activated.
Arming while driving
Press for two seconds while the vehicle is running. The
vehicle's siren will chirp, the lights will flash, and the doors will
lock (if unlocked). Then a bypass notification chirp will be heard
and the status LED will blink in a pattern of five indicating the
ignition is on.
The transceiver will beep once (or vibrate), and the arm icon (29) will
be displayed on the LCD.
22
© 2002 directed electronics, inc.