Errors And Error Diagnosis - CARDIOSTRONG TX40e Assembly And Operating Instructions Manual

2.2

Errors and error diagnosis

The equipment runs through regular quality controls during production. Nevertheless, errors or mal-
functions on the equipment may occur. Individual parts are often the cause of faults and replacement
is usually sufficient. Please use the following overview to see the six most common errors and how
to repair them. If the equipment still does not work properly, please contact your contract partner.
Error
Console only shows
lines
Running belt tilted
Running belt slips
through/stops
Scraping noises
Display does not show
anything
No pulse display
10
Cause
Safety key missing
Running belt not aligned
Belt tension/lubrication not ok Check belt tension/lubrication in accor-
Running belt scrapes, because
it is not aligned
Check plug connections
(cables)
Sources of interference in the
room
With chest strap
Unsuitable chest strap
Position of the chest strap
incorrect
Batteries empty
Solution
Check if the safety key is inserted and
place it in
Laufmatte gemäß Anleitung zentrieren
dance with the instructions
Align running belt in accordance with
the instructions
Mains switch on "on", make sure that the
safety key is inserted
Remove sources of interference (e. g.
mobile phone, speakers, WLAN, mover
robot, vacuum cleaner robot etc.)
Use suitable chest strap (see
recommended accessories)
Reposition chest strap and/or moisten
electrodes
Change batteries
TX40e