Wireless Network; Activating The Wi-Fi Mode; Connecting To The Wireless Network; Connecting To An Available Wireless Network Manually - Yealink T58A Skype for Business User Manual

The contacts will be displayed on the EXP50.
4. Press the corresponding EXP key to call the contact.
Note: For more information about how to connect and use the EXP50, please refer
toYealink_EXP50_Skype_for_Business_Edition_Quick_Start_Guide.

Wireless Network

The T58A Skype for Business phones support the Wi-Fi feature. If there is available Wi-Fi, you can enable the Wi-Fi
feature to connect the phone to the wireless network.
•

Activating the Wi-Fi Mode

•

Connecting to the Wireless Network

• Viewing the Wireless Network Information
• Disconnecting the Wireless Network Connection
Deactivating the Wi-Fi Mode
•
Activating the Wi-Fi Mode
About this task
Procedure
1. Navigate to Menu > Setting > Basic > Wi-Fi.
2. Turn on Wi-Fi.
The IP phone scans the available wireless networks in your area.
Connecting to the Wireless Network
There are three ways to connect the phone to the wireless network:
•

Connecting to an Available Wireless Network Manually

• Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
• Adding a Wireless Network manually
Connecting to an Available Wireless Network Manually
Before you begin
Get the password of the wireless network from your system administrator. Make sure that the Wi-Fi mode is activated.
Procedure
1. Navigate to Menu > Setting > Basic > Wi-Fi.
2. Tap More > Scan.
3. Select the desired wireless network.
4. If the network is secure, enter its password.
5. Tap Connect to accept the change.
| Wireless Network | 77