Attaching For Wall Mounting; Detaching; Rotating The Tab Of The Cradle - Snom D345 User Manual

D345 User Manual
3. Place the cables (Ethernet, etc.) in the cable slots of the footstand (Fig. 3).
Fig. 3

Attaching for wall mounting

See "Appendix 3 - Wall Mounting" on page 11.

Detaching

Lightly press the snap-fits of the footstand inwards (Fig. 1) and, at the same time, tilt the footstand
backwards and lift it from its anchorage in the mounting holes (Fig. 2).
Fig. 1
R
otating the tab of the cradle
The phone is delivered with the tab level with the inner edge of the cradle (Fig. 1). If you are going
to mount the phone on a wall, we recommend that you rotate the tab 180°. After rotation, the tip of
the tab (Fig. 4) will protrude slightly above the edge of the cradle. The small rectangular hole in the
receiver casing fits perfectly over the now protruding tip, holding the receiver safely in place in the
upright position on the wall.
Fig. 1 Fig. 2
Fig. 2
Fig. 3
11
Setting up the Phone
Fig. 4